Segment8 Rejector

Can Inspection > Online Can Inspection > Rejectors > Segment8 Rejector
  • Standing rejection or diversion
  • Up to 800 containers per minute maximum (dependent on container size and spacing)

  • Motorized height adjustment

  • Minimal Space Requirement Enables Adaptation to Almost Any Production Line

  • NEMA 4X, IP65 rated​

TapTone’s Segment8 Rejector provides reliable standing rejection or product diversion at speeds up to 800 containers per minute or 48 thousand per hour. Designed for tight production spaces, this system is floor mounted and is wash down safe. The adjustable stroke length, 0–5 in (0- 12.7 cm), will accommodate rigid containers made of glass, plastic, or metal. The Segment8 rejector is also offered in our SOLO model, which has all the same features as the standard Segment8 rejector but includes a controller for operation independent of TapTone inspection equipment.
How it Works 
When a reject signal is received, a solenoid is actuated, allowing air to extend the ram, which guides the faulty container off of the production line. The length of time the segment is extended is a function of the duration of the reject signal. When the signal ceases, the segment(s) are returned to their home or retracted position.
The TapTone Segment8 rejector can be added to any T550 or PRO Series user interface controlled systems. Contact our sales department or your local agent to find out more.
SPECIFICATION DESCRIPTION
Performance Up to 800 containers per minute maximum (dependent on container size and spacing)
Container Types Plastic, metal, glass, and cardboard
Spacing 1.5 inches minimum
Displacement 5 inches (12.7 cm) maximum
Electrical 100 – 120 V / 220 – 240 V, 3 A / 1.5 A, single phase
Air

Up to 100 psi / 6.9 bar maximum

Air Filter-Regulator Included

Material

Stainless Steel and Delrin

NEMA 4x, IP65 rated

Mounting
Tripod floor mount stand
Stand Height
72″ Stainless steel pole supplied with unit to be cut to height at customer facility.
Weight 120 lbs / 54 kg
Dimensions

r head assembly: 20.5 in (52 cm) x 12.1 x (30.7 cm) x 7.8 in x (19.8 cm)​

Production lines that require soft or standing rejection Production lines that require planning.